Bayonets

Turkish Model 1874 saber bayonet, perhaps for the Turkish Peabody, but I suspect these were actuall for a Winchester Musket. Originally pressed, checked leather grips, now replaced by a hand-stitched leather wrap.; steel bird's head pommel and cross-guard. Overall length ~28" with ~22-3/8" yatagan shaped blade. Blade is marked with a capital W (I suspect for Winchester). Pommel is stamped with a capital H, presumably and inspector's mark. Blade has been lightly sharpened.
Overall condition is about good to very-good; slight damage to grip and leaf-spring screw on right side (see images).
NOTE: No scabbard.

This is a U.S. Model 1855 Saber bayonet - used extensively during the Civil War - originally on the US Model 1855 Percussion Rifle. These rifles and bayonets saw hard use. This one has very obviously been converted to a side-arm, and is about the size of a good Bowie or hunting knife. Very crude shaping of the blade, but clearly a reduced bayonet blade; handle has obviously been removed and re-positioned at some time and is held in place by a model nail. Solid brass hilt and steel blade are battered and worn (see images).
Overall length is scabbard is ~14-5/8"; overall length out of scabbard is ~14-1/2"; blade length is ~9-3/4".
Scabbard is handmade and I cannot determine age; it is leather and crudely hand-stitched with leather and wire.

This is a US Model 1873 Trowel Bayonet for the 1873 Springfield Trapdoor Rifles, manufactured circa 1870s, with scabbard.
Overall length of bayonet is ~14-1/2; socket length is ~2-5/8"; blade width is ~3-1/2", length is ~10".
Bayonet appears to be in working order but does has some scattered rusting; latching mechanism is working smoothly.
Scabbard is in poor condition as the leather is detaching from the metal body (see images); US rosette on belt loop is intact.
NOTE: Sold as is.

Unknown Socket Bayonet without scabbard; blade flat is stamped on flat but - with the exception of a "5" - is virtually illegible.
Overall length is ~19-3/4"; muzzle length is ~3", shank length is ~1-1/8"; Z-mortise slot with attaching ring. Triangular blade length is ~17-1/4"; blade has deep un-stopped fullers on the sides - without shoulders - and shallow stopped fuller on the face; blade face at ricasso is ~7/8" wide.
Overall condition is about fair with scattered pitting and some damage to the socket ends (see images).