Bayonets

Russian M91/30 Mosin-Nagant Socket Bayonet designed for the Mosin-Nagant Infantry Rifle. These are considered Communist Russian (post-1918) as opposed to Imperial Russian (pre-1918). The post-1918 type - or Second Pattern - utilizes an integral push-button/spring latching mechanism instead of a locking ring as on the Russian Model 1891 Mosin-Nagant Socket Bayonet (1st Pattern).
The tip of these bayonets - both models - can be used as a screw-driver. The Mosin-Nagant Model 1891 Bayonets - and variants - were used from 1891 through WWII; this variant from 1930 through WWII. This bayonet type was also used by Austria and Finland.

Overall conditions about good.

Original Spanish Military Bayonets for the FR-7, FR-8, and CETME rifles. These bayonets are approximately 13" long overall, black phosphate finish. The blade displays the Spanish eagle, maker's markings, and serial number. Bolo-style blade is ~8-5/8" in length.
Conditions vary but average from good to very-good; sold as-is. First come first served on condition.

This is a long version of the Spanish 1893 "Short" Mauser Knife Bayonet with one other rather subtle difference: it has checkered-wood grips - whereas the short bayonet has smooth-wood grips. This bayonet was designed to fit the Spanish Mauser Rifle (Fusil) Model of 1893; later on the Spanish Mauser Short Rifle (Mosqueton) Model 1916.
Most of these bayonets were manufactured at - and stamped - "Artilleria F-Nacionale Toledo" in one of about three different configurations.
The hilt construction is steel, with steel rudimentary "bird's head" pommel, steel crossguard with muzzle-ring, and - as mentioned before - checkered-wood grips.
The blade is single-edged, single-fullered (both sides) with manufacturer's stamp on one side of the ricasso, serial number on the cross-guard.
Scabbard is of steel throat and drag, mounted on black leather body; tear-drop frog stud on the throat, with ball finial on the drag.

According to "Janzen's Notebook," this bayonet was also used by Mexico (and very possibly Portugal).

I should mention that this long bayonet was for use on the Spanish Mauser "Short" Infantry Rifle, whereas the short bayonet was for use on the standard Spanish ontract "Long" Mauser Infantry Rifle; such was the thinking of the times: short rifle, long bayonet; long rifle, short bayonet. This kept the thrusting distance the same.

Good condition overall.

This is a long version of the Spanish 1893 "Short" Mauser Knife Bayonet with one other rather subtle difference: it has checkered-wood grips - whereas the short bayonet has smooth-wood grips. This bayonet was designed to fit the Spanish Mauser Rifle (Fusil) Model of 1893; later on the Spanish Mauser Short Rifle (Mosqueton) Model 1916.
Most of these bayonets were manufactured at - and stamped - "Artilleria F-Nacionale Toledo" in one of about three different configurations.
The hilt construction is steel, with steel rudimentary "bird's head" pommel, steel crossguard with muzzle-ring, and - as mentioned before - checkered-wood grips.
The blade is single-edged, single-fullered (both sides) with manufacturer's stamp on one side of the ricasso, serial number on the cross-guard.
Note: no scabbard.

According to "Janzen's Notebook," this bayonet was also used by Mexico (and very possibly Portugal).

I should mention that this long bayonet was for use on the Spanish Mauser "Short" Infantry Rifle, whereas the short bayonet was for use on the standard Spanish ontract "Long" Mauser Infantry Rifle; such was the thinking of the times: short rifle, long bayonet; long rifle, short bayonet. This kept the thrusting distance the same.

Very good condition overall; excellent grips. Bayonet has been coated in varnish; this was a common practice usually done by museums to prevent rusting from handling/outside elements.

Original Swedish Model 1914 Carbine Bayonet and Scabbard. Wood grips with steel pommel and guard; scabbard is sheet-rolled steel. Pommel is stamped, "IKO" over "No.100"; scabbard is stamped, "1/K.8" over "No.58"; blade is stamped with a "E" upon an 'anchor', flanked by "EJ (left) and "JB" (right).
Overall length in scabbard is ~19-1/8"; overall length out of scabbard is ~18-1/8"; double-edged blade length is ~13".
Good to very-good overall condition; scabbard has scattered rust freckling ranging from light to moderate (see images).