Bayonets

Original Swedish Model 1914 Carbine Bayonet and Scabbard. Wood grips with steel pommel and guard; scabbard is sheet-rolled steel. Pommel is stamped, "IKO" over "No.100"; scabbard is stamped, "1/K.8" over "No.58"; blade is stamped with a "E" upon an 'anchor', flanked by "EJ (left) and "JB" (right).
Overall length in scabbard is ~19-1/8"; overall length out of scabbard is ~18-1/8"; double-edged blade length is ~13".
Good to very-good overall condition; scabbard has scattered rust freckling ranging from light to moderate (see images).

Turkish Ersatz (replacement) Bayonet for the Turkish 1903 Mauser. All steel construction with single muzzle-ring hilt. These were basically "last-ditch" type bayonets, very crudely manufactured to fit on various rifles anyw ay they could.
Overall length in scabbard is ~15-3/4 "; overall length out of scabbard is ~14-1/8"; blade length is ~9-3/16". Overall condition is about fair to good, considering manufacture techniques. Crude manufacture prevents bayonet from entering scabbard completely (by design).

Turkish Ersatz (replacement) Bayonet for an unknown Turkish-used rifle. All steel construction with double muzzle-ring hilt. These were basically "last-ditch" type bayonets, very crudely manufactured to fit on various rifles anyw ay they could.
Overall length in scabbard is ~16-1/2"; overall length out of scabbard is ~15-1/4"; blade length is ~9-3/4". Overall condition is about fair to good, considering manufacture techniques.

Turkish Model 1874 saber bayonet, perhaps for the Turkish Peabody, but I suspect these were actuall for a Winchester Musket. Originally pressed, checked leather grips, now replaced by a hand-stitched leather wrap.; steel bird's head pommel and cross-guard. Overall length ~28" with ~22-3/8" yatagan shaped blade. Blade is marked with a capital W (I suspect for Winchester). Pommel is stamped with a capital H, presumably and inspector's mark. Blade has been lightly sharpened.
Overall condition is about good to very-good; slight damage to grip and leaf-spring screw on right side (see images).
NOTE: No scabbard.

Turkish Model 1935 Mauser bayonet with scabbard. Walnut grips, steel pommel and guard. AS.FA (Turkish Military Arms Factory) stamped on pommel, right side. "S" stamped on pommel back-side; serial number on left side of pommel; ricasso is unmarked.
These were manufactured to fit the various Turkish Mauser rifle models of 1890 through 1935.
Overall length in scabbard ~15-1/2"; overall length out of scabbard ~14-3/4"; blade length ~9-7/8".
From the Estate of Russ "Rusty" Cox, character actor (The Wind and the Lion, Broken Spur, The Sacketts, Rough Riders, On the Line).
Bayonet and scabbard are in very good condition.

This is a U.S. Model 1855 Saber bayonet - used extensively during the Civil War - originally on the US Model 1855 Percussion Rifle. These rifles and bayonets saw hard use. This one has very obviously been converted to a side-arm, and is about the size of a good Bowie or hunting knife. Very crude shaping of the blade, but clearly a reduced bayonet blade; handle has obviously been removed and re-positioned at some time and is held in place by a model nail. Solid brass hilt and steel blade are battered and worn (see images).
Overall length is scabbard is ~14-5/8"; overall length out of scabbard is ~14-1/2"; blade length is ~9-3/4".
Scabbard is handmade and I cannot determine age; it is leather and crudely hand-stitched with leather and wire.

This is a US Model 1873 Trowel Bayonet for the 1873 Springfield Trapdoor Rifles, manufactured circa 1870s, with scabbard.
Overall length of bayonet is ~14-1/2; socket length is ~2-5/8"; blade width is ~3-1/2", length is ~10".
Bayonet appears to be in working order but does has some scattered rusting; latching mechanism is working smoothly.
Scabbard is in poor condition as the leather is detaching from the metal body (see images); US rosette on belt loop is intact.
NOTE: Sold as is.

Unknown Socket Bayonet without scabbard; blade flat is stamped on flat but - with the exception of a "5" - is virtually illegible.
Overall length is ~19-3/4"; muzzle length is ~3", shank length is ~1-1/8"; Z-mortise slot with attaching ring. Triangular blade length is ~17-1/4"; blade has deep un-stopped fullers on the sides - without shoulders - and shallow stopped fuller on the face; blade face at ricasso is ~7/8" wide.
Overall condition is about fair with scattered pitting and some damage to the socket ends (see images).